First Look: Labelflash™

Designing and writing Label (Label-side):

As mentioned earlier, we will use Nero Burning ROM 6.6.1.3 to test the Labelflash™ technique with, and so far the version number ‘6.6.1.3 NEC” is the only version capable of supporting Labelflash™ for the time being.

Let us begin with clicking the Labelflash™ icon on the Nero Burning ROM symbol menu:

A new screen will pop-up and we are ready to start our design:

We made a quick and simple design, and selected Highest print quality, selectable modes are: Fast, Medium, Highest and Custom.

Under the custom mode you can adjust some settings of your own choice:

There are: Contrast level (1-100) and the Rotation/Encoding Speed (Default, 7875 rpm, 4500 rpm and 2250 rpm).

Now that we have looked at the custom settings, let us go back to the other settings, in this case the Highest print quality option and hit burn.

At the point where the progress bar reached 50% the remaining time suddenly showed 00:00 min.

As we can see the total burning time and the ‘guessed” time differ by only 25 seconds.

But let us take a look at the finished result:

As the Label (printing) side is very shiny, it was hard to make any good photos of the real quality that is visible to the human eyes.

On the next page we will make a label of the data surface…..