CloneCD version 2.8.1.2 (Important Fix)

No i do not upgrade i work with version 1.004 and works
fine!

...and I bet you're running Windows V1.01 too.

Version 1.0.0.4. is filled with bugs you koekert! http://www.cdfreaks.com/jochem/../smilies//smile.gif

There are some reports that this version works with the new Securom Protection issue ie; Cataclysm. I have not tried it yet but let you know as sson as I do.

Well Good news at last, it works!!!

BUT You have to make sure that your burner SUPPORTS Reading Subchannel Data.

The backedup copy works on NORMAL CD-ROM, No need for DVD's anymore.
Hardware used in my case;
Burner: Plextor PX-124TS SCSI
Reader: Sony CDU-4811
Settings for the burner;
Subchannel Data from Data Tracks ON
Subchannel from Audio Tracks ON
Every thing else OFF

The image was made using my Plextor as my Sony Reader is useless. The Read was done at Max 32 speed on my burner, No Need for slow reading as previously thought. You should be able to use the Max read that your burner supports to creat the image.

I have also used the Max Write on my Burner Plextor @12X, although this should not make any difference on the outcome.

Important:

When you use your burner in some burners once you are ready to burn the image, you might get the error message saying that Clone CD Does not have the Exclusive right to the burner, If you get that message just press Retry and you will be on your way.

Good Luck !

Another important message from Olli concerning Clone 2.8.1.2. and New Securom 2.

Below is a direct quote from Clone Clinic;

"You can't execute a copy of New Securom from a Burner. You can use the burner to create the image".

So try NOT TO RUN your backup FROM THE BURNER, it would not work.

There is no problem running the backup from any ordinary CD-ROM however.

Some that only have one unit Burner/Reader might find this a bit difficult. Sorry Guys!

Dammit, with *important fix*, I hoped my old Traxdata was finally supported http://www.cdfreaks.com/jochem/../smilies//smile.gif

Can this version copy safedisc 2.0 games? I hope so. Or is it only in version 3! I hope CloneCD can copy safedisc 2.0!

ollie said that he does not have any safedisk 2 titles, so he does not know if it will copy it. i have heard that it does not, but ollie is still working on it, man this guy rulez.

Any serial for this version??????
Thanks

Can I copy Red Alert with it or not

OK, when will work my HP8100

warrior: As stated on the elby-page the HP8100 hardware doesn't support writing in real raw mode, and thus will never be fully supported by CloneCD. I had one myself before I bought my HP9310 that works like a charm with ccd...

Well.. Iv'e got a small prob... Anybody know if i can use CloneCD with only ONE cd-drive (a Creative 8*4*32 RW)??

[Fafnr]: U can use only one drive if you'd like that. Just use your writer also as a reader to make the image!
http://www.cdfreaks.com/jochem/../smilies//wink.gif

Iam affraid clone is failing badly this time on securom and safedisk 2. seems only a few people can do these protections, i cant read about it on www.cdrtimes.com

Depends how you look at it the1englishman!
One question? are all the guys that post in that www.cdrtimes have a habit or STEALING, LEACHING bits and pieces of news from this forum and put their name on it!
This pheonix character have rip off my message from this post concerning the Clone 2.1.8.2 and put his name as the submitter. This is pretty lame in my book the1englishman, how fucking low can a person get!!! he did not even bother changing the words for fuck sake just cut and pasted it directly from here even with MY COMMENT! That's fucked.

Where us de damned serial for this 2.8.1.2. Anyone?

So is there any chance of a Teac Cdr-55s ever beinhg supported????

burnt red alert with no problems.

Paradox,

32x bloody hell, I don`t dare read at anymore than 4x for quality sake that is one fast read. I am starting to read that a couple of earlier releases like homeworld cataclysm come with this protection scheme on, which is pretty worrying as no mention of this protection has been brought up before, I have sent out Homeworld Catacyslm ah he did email me, but I sent him the serial number but he didn`t email back, i`m going to have to find out on this one.

Just got Combat Flight Sim 2 as well, any news on this protection?

Regards

Fast UK Trader

Fast UK Trader
you mentioned something about sending out HW Cataclysm to some one regarding a serial... I am not really sure if I am following you???
Was it some thing you were trying to ask?

Regarding the titled mentioned above, rest assure that it is infact protected with the NEW VERSION of SECUROM 2 which is probably not quite detectable by some of the the currect copy prortection detectors that I know, including the clone data base latest version. But if you read my erlier post it should be easy to backup. You have asked about the MS CFS2, this title is defintely protected infact both disks are safe disk protected. Now here is when it gets funny a bit, the protection that this title has, is refered to as the New Safe Disk which was or is a version before the Safe Disk V 2.0 which is used currently in Red Alert 2.
Below is how you can recognise the protection and what settings you need to have for the back up to be successful;

Files in root directory:
'00000001.TMP', 'CLCD16.DLL', 'CLCD32.DLL' and 'CLOKSPL.EXE'

Files in installation directory:
'GAME.EXE' and 'GAME.ICD'

CloneCD Standard Settings:
fast error skip ON
all other options are OFF

For read and wirte I used the Max speed allowed by my burner and the back up went fine.

Good Luck.

Ahh!! Thx Wookie! http://www.cdfreaks.com/jochem/../smilies//smile.gif

still need serial..........anyone got??????????

thx

Tried some version of the program, but still I get the message "Your CD-ROM Recorder isn't supported" ???
Plextor 8/2/20...Man that SUCKS !!

B@NG: Are you using firmware 1.04 - That's the only FW version supported by CloneCD.

i have been trying to burn cfs2 with clone cd the new version.it keeps giving me errors in my log and doesnt create the cd any suggestions?? im using a hp but cant rtemember the model