Corsair MP300 240GB NVMe SSD Review

Posted 29 July 2018 17:52 CET by Jeremy Reynolds

OakGate Platform – ‘Fresh out of Box’ Tests

These tests provide a highly consistent basis for comparing solutions.  The sequence of tests begins with a purge of the drive to ensure that it starts in a FOB state.

The tests cover all of the essential IO performance characteristics.

Sequential Writes

This test performs 20 seconds of Sequential Write IOs for each combination of Queue Depths 1, 4, and 32, and IO Sizes of 4K, 128K, and 1024K.  IO traffic is limited to an IO Range of 1GB (which is equivalent to a test file size of 1GB).

Here are the results for the Corsair MP300 –

 

Here is a comparison of the 128K, Queue Depth 32, Sequential Write performance with the other products I have tested to date –

A good result but again we have not hit Corsair’s specification of 920 MB/s.

Please note that NVMe drives are tested with an IO Size of 128K.

Let’s also have a look at how the Sequential Writes Power Consumption compares, but to do this fairly we must divide the average MB/s by the average Milliwatts to get a value for the effective work done.  Here is the result –

You can see that the Corsair MP300 has an outstanding level of power efficiency.

Sequential Reads

The test performs 20 seconds of Sequential Read IOs for each combination of Queue Depths 1, 4, and 32, and IO Sizes of 4K, 128K, and 1024K.  IO traffic is limited to an IO Range of 1GB.

Here are the results for the Corsair MP300 –

 

Here is a comparison of the Sequential Read performance with the other products I have tested to date –

 

This is an excellent, which exceeds Corsair’s specification of 1580 MB/s.

Random Writes

The test performs 20 seconds of Random Write IOs for each combination of Queue Depths 1, 4, 32 and 128 and IO Sizes of 4K, 16K, and 32K.  IO traffic is limited to an IO Range of 1GB.

Here are the results for the Corsair MP300 –

 

Here is a comparison of the 4K, Queue Depth 1, Random Write performance with the other products I have tested to date –

This is a good result in comparison to the SATA drives but it falls behind the other NVMe drives.

Let’s have a look at the Latency Distribution for the 4K, QD 1 performance –

 

This graph shows the Latency for every IO that was performed in the 20 seconds of traffic.  It shows the Number of IOs (IO Count) that fell within a particular period of Time (Microseconds).  The red line plots the Time against the Percentage of total IOs performed.

You can see that the Corsair MP300 achieves a high level of consistency and 99.9% of all IOs have a Latency of 30 Microseconds or less (which can be compared to 20 Microseconds achieved by the Samsung 970 EVO in this test).

Random Reads

The test performs 20 seconds of Random Read IOs for each combination of Queue Depths 1, 4, and 32, and IO Sizes of 4K, 16K, and 32K.  IO traffic is limited to an IO Range of 1GB.

Here are the results for the Corsair MP300 –

 

Here is a comparison of the 4K, Queue Depth 1, Random Read performance with the other products I have tested to date –

This is a good result but it actually falls behind a few of the SATA drives I have tested.

4K Random Mixed Reads/Writes

The test performs 20 seconds of 4K Random Mixed Reads/Writes for each combination of Queue Depths 1, 4, and 32, and Read/Write ratios of 0/100, 30/70, 50/50, 70/30, and 100/0.  IO traffic is limited to an IO Range of 1GB.

Here are the results for the Corsair MP300 –

 

Here is a comparison of the 4K Mixed Random 50% Read/50% Write, Queue Depth 1 performance, with the other products I have tested to date –

An excellent result.


Now let’s head to the next page, to look at the results for the Oakgate Sustained Write and Recovery Tests…..