Crucial MX500 1TB SSD Review Antonis Sapanidis .

Its not easy reach the top and Crucial has done this many times in the past, but it even harder to stay at the top. With the release of the MX500 SSD that comes with the new second generation of 3D TLC NAND, Crucial is aiming again for the the top. So read this review to find out all about the Crucial MX500.

Its not easy reach the top and Crucial has done this many times in the past, but it even harder to stay at the top. With the release of the MX500 SSD that comes with the new second generation of 3D TLC NAND, Crucial is aiming again for the the top. So read this review to find out all about the Crucial MX500.

Crucial MX500 1TB SSD Review

Posted 28 January 2018 20:19 CEST by Antonis Sapanidis

 

Review: Crucial MX500 1TB

Reviewed by: Antonis Sapanidis

Provided by: Crucial

Firmware version: M3CR010

 

 

 

It’s not that long ago that I first tested the all new Crucial MX300 750GB SSD, and back then this was the first drive to feature the new 3D TLC NAND that micron had to offer. Now Micron has a new SSD and it’s not called MX400 as the previous naming scheme would have suggested, but it’s the MX500, and as we can expect it’s an update to the MX300 featuring the 2nd generation of #D TLC NAND, from Micron. 

Thanks to Crucial for providing me with the MX500 1TB SSD for this review, and to find out more about Crucial and their products simply click here.

So let’s start this review by looking at the packaging and its contents.

Crucial MX500 1TB SSD

As always I will start by taking a look at the package and the contents that are included with the Crucial MX500 1TB SSD. We’ll start with the package.

The front of the box.

The back of the box.

The front of the Crucial MX500 SSD.

Here is the rear of the Crucial MX500 SSD.

Here is a look at the inside the of the Crucial MX500 1TB SSD, and when I opened the drive I saw eight micron NAND and one RAM chip.

On the other side of the PCB we find another set of eight micron MAND, the Silicon Motion controller, and the RAM.

Specifications of the Crucial MX500 1TB SSD

The new MX500 uses Micron’s 2nd generation 3D-TLC NAND and it can reach read speeds of up to 560MB/s and write speeds of up to 510MB/s. One big change that is welcomed is the warranty as it has gone up from three years to five years. The MX500 currently is only available as a 2.5” SATA drive, with capacities from 250GB, 500GB, 1TB, and 2TB. Pricing at the time of this review starts from €82 for the 250GB SSD and rises to €137, €266, and €514 for the 2TB SSD. Later we will also have an m.2 SATA version of the MX500.

CrystalDiskInfo

In the above screenshot we can see all the available info for the Crucial MX500 1TB SSD.

 

Let’s head to the next page where we take a look at our testing methods and the review PC.