Toshiba XG6 1024GB NVMe SSD Review

Posted 11 October 2018 17:11 CET by Jeremy Reynolds

OakGate Sustained Write and Recovery Tests

Sustained Sequential Writes

This test starts with a purge (Secure Erase), so that the drive is in a FOB state, and then performs 128K Sequential Writes until twice the drive’s User Capacity has been written to.

Here is a graph showing the resulting Write Bandwidth over time –

You can see that after a relatively short lived burst of speed the drive then oscillates between a peak speed of around 1,600 MB/s and a low of around 600 MB/s.

Let’s zoom in on the first 60 seconds –

 

You can see that the Toshiba XG6 holds a steady speed of around 3,000 MB/s for about 5 seconds. This is clear evidence of the Toshiba XG6’s SLC Write Cache Technology being in play. As the drive is empty at the start of the test, it is able to write to around 15GB of data before its SLC Write Cache is exhausted and the write speed falls to around 1,600 MB/s.  After this you can see the ‘oscillating’ behaviour begin.

4K Random Writes, FOB to Degraded (Steady State) to Recovered

This test is designed to fully degrade the drive’s performance and then see how it recovers following a Trim and a period of Rest.

In this test I start with a purge of the drive to take it to a FOB state.

  1. FOB Performance – 4K Random Writes Bandwidth

I then test the FOB 4K Random Write Performance for 120 seconds at Queue Depths of 1 and 32, in an IO Range of 16GB, the result was as follows –

  1. Sequential Writes to two times User Capacity

I then performed 128K Sequential Writes to the drive for twice the drive’s user capacity (as in the previous Sustained Sequential Writes).

  1. 4K Random Writes for 1 Hour

This was immediately followed by performing 4K Random Writes to the drive for 1 hour. Here is a graph showing the resulting Bandwidth over Time –

 

 

You can see that the Random 4K Write performance eventually settles into a steady state of around 70 MB/s. 

  1. Fully Degraded, 4K Random Write ‘Steady State’ Performance

I then immediately test the 4K Random Write Performance (as we did in the initial FOB test), and the result was as follows –

You can see that performance has dropped significantly compared to the test performed in the FOB step.  At this stage it is fair to say that the drive’s performance is fully degraded and in a Steady State.  It’s as bad as it can get!

  1. Trim and Rest for 5m

I then liberally sent Sequential Trim commands to the drive for a minute (to ensure that the drive’s entire range of logical blocks (= User Capacity) was trimmed.

I then let the drive rest for 5 minutes before retesting 4K Random Write performance again. The result was –

  1. ‘Recovered’ 4K Random Write Performance after Trim and 5 minutes rest

As we have come to expect from Toshiba drives, you can see that performance has fully recovered to support both the burst of writes at a Queue Depth of 1 and at a Queue Depth of 32. Outstanding!


Now let’s head to the next page, to look at the Conclusions from this review…..