Intel DC P3700 1.6TB NVMe Enterprise SSD Review – An Awesome Machine

Please click
here
to view or download a detailed introduction to Myce’s Enterprise Class Solid
State Storage (‘SSS’) Testing Methodology as a PDF.

Put briefly:

All testing is performed on an OakGate Technology test unit

We perform two sets of Performance Tests:

  1. A full set of the mandatory Storage Network Industry
    Association’s (‘SNIA’) tests as specified in their Solid State Storage
    Performance Test Specification Enterprise V1.0 – SNIA
    SSS PTS Version 1.0
    .
  2. A set of tests, known as the ‘Myce/OakGate Full
    Characterisation Test Set’, that provides readers with a fuller
    characterisation of the solution.

We also review other important factors such as Power
Consumption, Data Reliability and Failover features.

A word about SNIA testing – before striking a partnership
with OakGate Technology I spent some time researching how I might implement
SNIA testing using freely available tools such as IOMeter and FIO.  I arrived
at the conclusion that whilst it was theoretically possible it was
impractical.  The reason for this is as without the automation offered by a
test bench, such as the OakGate Unit, the only way to meet the SSS PTS requirements
is to run the maximum number of test cycles and then to manually look back at
the results to determine when/if steady state has been achieved in the workload
specific test cycle, and then harvest the data from the qualifying Measurement
Window. This means that the test runs would always take a maximum elapsed time,
and there would be a great deal of human effort required to review, gather, and
report upon the data.  I empathise with, acknowledge, and respect the efforts
of other reviewers who endeavour to meet the SNIA’s principles in their testing
– I am privileged and thankful to be able to use a superb test bench which
automates the whole process and allows me to meet the SNIA’s specification in
full.

Before we move on, let’s remind ourselves of some basics –

When reviewing the performance of an SSS solution there are
three basic metrics that we look at:

1.  IOPS – the number of
Input/Output Operations per Second

2.  Bandwidth – the number of
bytes transferred per second (usually measured in Megabytes per second, ‘MB/s’)

3.  Latency – the amount of time
each IO request will take to complete (usually, in the context of SSS
solutions, measured in Microseconds, which are millionths of a second).

It is true to say that IOPS and Bandwidth had all been
growing rapidly before the advent of SSS solutions, but Latency can only be significantly
decreased by eliminating mechanical devices, and thus Latency is the single
most important aspect that SSS solutions deliver to enhance performance.

Latency in a technical environment is synonymous with delay.
In the context of an SSS solution it is the amount of time between an IO
request being made, and when the request is serviced.

Bandwidth, also commonly referred to as ‘Throughput’, is the
amount of data that can be transferred from a storage device to a host, in a
given amount of time.  In the context of SSS solutions it is typically measured
in Megabytes per second (MB/s). 

A great enterprise SSS solution
offers an effective balance of all three metrics.  High IOPS and Bandwidth is
simply not enough if Latency (the delay in an IO operation) is too high. As we
will see in the test results presented below, as Latency increases IOPS will
inevitably decrease.

Queue Depth is the average amount
of IO requests outstanding.  If you are running an application and the Average
Queue Depth is one or higher and CPU utilisation is low, then the application’s
performance is most probably suffering from a ‘Storage Bottleneck’.

Another important factor to
remember is that SSS performance is influenced by previous workloads, not just
the current workload, and especially by what has previously been written to the
drive. As specified in the SNIA SSS PTS the goal of all good Enterprise level
testing is to provide consistent circumstances, so that results can be compared
fairly across different SSS solutions – it is for this reason that all of our
tests start with a purge of the drive, so that it starts in a ‘Fresh Out of the
Box’ (FOB) state.  Most tests then have a pre-conditioning phase where the drive
is put into a ‘Steady State’ before the test phase begins. Put briefly, a
‘Steady State’ is achieved when the performance of the drive no longer varies
over time and settles into a consistent level of performance for the workload
in hand. You can find a detailed explanation of ‘Steady State’ and how it is
determined in the SNIA tests in our Enterprise Testing Methodology paper, which
can be viewed or downloaded as a PDF by clicking here.

For interest, here are some
generally accepted assumptions that differentiate the use and therefore the
approach to testing Enterprise/Server and Consumer/Client SSS solutions:

Enterprise/Server SSS
assumptions:

  1. The drive is always full
  2. The drive is being accessed 100% of the time (i.e. the
    drive gets no idle time)
  3. Failure is catastrophic for many users
  4. The Enterprise market chooses SSS solutions based on their
    performance in steady state, and that steady state, full, and worst case
    are not the same thing

Consumer/Client SSS
assumptions:

  1. The drive typically has less than 50% of its user space
    occupied
  2. The drive is accessed around 8 hours per day, 5 days per
    week, and typically data is written far less frequently
  3. Failure is catastrophic for a single user
  4. The consumer/client market generally chooses SSS solutions
    based on their performance in the FOB state

 

Esther
Spanjer, Director, Enterprise Business Development EMEA at Sandisk, said, ‘I am
happy to commend Myce for their high level of professionalism and cooperation
during the review process’, Ms. Spanjer added, ‘I wish them every success in
their partnership with OakGate Technology and their initiative to provide
authoritative performance reviews for the Enterprise Solid State Storage market

Now let’s head to the next page, to look at the results
of our SNIA IOPS (Input/Output Operations per Second) Test…..